The Swift Dick Model Petrographic Microscope

Allen B. Dick first described his design for a polarizing microscope in the Journal of the Royal Microscopical Society (RMS, 1889, pp.432). In this design the stage remains fixed, while the polarizer and analyzer rotate in synchronism by gearing with an angle scale readout on the stage. The microscope was manufactured and signed by J. Swift & Son of 81 Tottenham Court Rd., London (Swift Catalog, 1891). The instrument became known as the Dick Model featuring an English foot with a Traviss rolling slide holder.
 
This petrological microscope differs from the usual example in that it has a fixed stage instead of the more commonly encountered circular rotating stage. Instead of rotating the specimen, the two polarizing elements, along with the eyepiece, are made to revolve together. The crosshairs in the eyepiece turn, leaving the object stationary. This allows the tiniest specimen to be maintained in position during the entire rotation, eliminating the need for delicate centering adjustments. Both the polarizer and the analyzer are rotated by a set of large gears, with the smaller hand gear engaged to the large eyepiece assembly just above the fine adjustment. The rotation is transmitted to the substage by means of a long pinion rod, which extends down from the hand gear through both the arm and stage of the microscope.
 
Just under the stage and part of the condensing arrangement is a large disk (circle) divided into 360-deg. The disk rotates simultaneously with the nicol polarizing prisms. A magnifying lens is provided on the front of the body-tube for easy focus on the graduations of this large disk (visible at the front of the stage). A low power condensing lens is mounted over the polarizer, with the higher power element mounted in a slide which can be slid into place for use with short focal length objectives for conoscopic work. The specimen is carried by a Will R. Traviss type roller stage (wheels on the sides). The body-tube features two horizontal slides (inserts), which pass through the optical path. Each is furnished with a lens and an open aperture. The lower one is for showing rings round the optic axis of crystals and the upper one is for exhibiting optic images in small crystals (conoscopic figures). Both can be adjusted up and down in a vertical plane. The upper-right side of the stage is divided into mm. in both directions, for recording the position of an object. The slot in the eyepiece-tube is for insertion of a micrometer, retardation plate or quartz-wedge (not present). The fine focus adjustment is a differential screw motion, with a large milled head divided into 80 parts, each division being equal to 0.01 mm., making it able to be used for finding the refractive index of a transparent mineral. A Kleinís quartz plate can be dropped into the open aperture of the lower slider (on the body-tube); it can also be used in a holder on the stage (not present).
 
If the microscope is to be used for non-pol. work, the analyzer is moved out of position and the substage polarizer swung to the side. The condenser is furnished with an iris diaphragm and two small stops (both missing). The accessories include the following: 2 Swift Universal eyepieces, 3 Huyghenian type eyepieces one with crosshairs (adjustable), a triple nosepiece, 5 Swift objectives all with brass storage cans, and a pinhole eyepiece cap (used for alignment) all in a fitted mahogany storage case.
 
The 1891 Swift catalog claims that this microscope was supplied to all the departments of the Geological Survey throughout the kingdom. The price at that time was listed, without lenses, at £18.00; complete it was closer to £32.00.

Also see this microscope in the vertical position revealing additional details of its construction.

The Swift Improved Dick Petrographic Microscope

 
Some years later, an improved model was introduced by Swift. The stage is fixed but, if desired, a rotating stage may be attached. The polarizer, the analyzer (in the cap), and the ocular with its crosshairs may be rotated together by means of gearing which can be clamped in any position. The rotation can be read to 5-min. of arc by means of a magnifier just above the rotating graduated disk at the top of the body tube. Either nicol (polarizer) prism may be rotated independently or thrown out of the line of collimation. A second analyzer is fitted in the body tube above the objectives and there are two Bertrand lenses, one above the other, for giving either large or small interference (conoscopic) figures. Below the stage is a turret carrying three different condensers and an iris diaphragm all of which can be raised and lowered by means of a rack-and-pinion. Multiple condensers allow the matching of NA to that of the objectives. The fine focus reads in 1/1000 of a mm. of vertical movement.

Comments or inquiries concerning these pages can be addressed in care of "webmaster at arco-iris.com". Due to the horrendous volume of spam you need to Use "Inquiry for George" as the subject line or it will not get past the spam filter.